The chassis process (chassisd) on the SFC routing node detected an error in the transmit
electrical path between the indicated port on the indicated F2SIB and F13SIB on the
indicated plane.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FM_ERROR_F13_FB_HSR_TXP
System Log Message error-message errors on LCClcc_FPCfpc-slot_pfe link via
ST_SIB_Lfrom-lcc-sib_FBfiber-bundle to F13SIBto-sfc-sib
Description In a Tx-Plus routing matrix, packets traverse both electrical and optical media as they
travel between the Switch Interface Boards (SIBs) in the T1600 routing nodes (called
ST-SIB-Ls) and the SIBs in the TX Matrix Plus platform (called F13SIBs and F2S-SIBs).
The chassis process (chassisd) on the routing node that houses the indicated F13SIB
detected an error in the electrical path between the indicated ports on the F13SIB and
the indicated ST-SIB-L on the indicated LCC.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FM_ERROR_F13_FB_RX_VC
System Log Message error-message on F13SIBfrom-sfc-sib_FBfiber-bundle VCSEL vcsel Channel vcsel-channel
connected from LCC lcc SIB_L to-lcc-sib
Description In a Tx-Plus routing matrix, packets traverse both electrical and optical media as they
travel between the Switch Interface Boards (SIBs) in the T1600 routing nodes (called
ST-SIB-Ls) and the SIBs in the TX Matrix Plus platform (called F13SIBs and F2S-SIBs).
The chassis process (chassisd) on the routing node that houses the indicated F13SIB
detected the indicated error as packets that were traveling in the in the optical media
from the indicated ST-SIB-L on the indicated LCC.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
155Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages
To Next Page
Loading...
Need help?
General
