EasyManua.ls Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 227

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Description The state of the indicated component (field-replaceable unit, or FRU) changed as
indicated.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
CHASSISD_FRU_INVALID_SLOT
System Log Message FRU fru-name is not supported in current slot
Description The chassis process (chassisd) detected that the indicated hardware component
(field-replaceable unit, or FRU) was inserted in a slot that is not valid for that component
type.
Type Error: An error occurred
Severity critical
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FRU_IO_ERROR
System Log Message function-name: fru-name operation error: reason (error-message)
Description The chassis process (chassisd) could not perform the indicated I/O operation on the
indicated component (field-replaceable unit, or FRU).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_FRU_IO_OFFSET_ERROR
System Log Message function-name: fru-name operation error: reason 0xoffset (error-message)
Description The chassis process (chassisd) could not perform the indicated I/O operation at the
indicated byte offset.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
163Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages

Table of Contents

Related product manuals