Action Contact your technical support representative.
CHASSISD_I2C_WRITE_ERROR
System Log Message function-name: write error for group group-id at address 0xaddress, offset offset
Description The chassis process (chassisd) could not write I2C data to the indicated device.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_IDEEPROM_READ_ERROR
System Log Message Unable to read fru-name ID EEPROM
Description The chassis process (chassisd) could not read the I2C ID EEPROM of the indicated
component (field-replaceable unit, or FRU).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_IFDEV_CREATE_FAILURE
System Log Message function-name: unable to create interface device for interface-name (error-message)
Description The chassis process (chassisd) creates initial interface devices for newly installed PICs
and pseudodevices. It could not create a device for the indicated PIC or pseudodevice.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause Necessary resources might have been unavailable.
Action Contact your technical support representative.
CHASSISD_IFDEV_CREATE_NOTICE
System Log Message function-name: created device-name for interface-name
Description The chassis process (chassisd) created the initial interface device for the indicated newly
installed PIC or pseudodevice.
173Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages
To Next Page
Loading...