CHASSISD_IFDEV_NO_MEMORY
System Log Message function-name: unable to allocate memory for interface-type interface
Description The chassis process (chassisd) could not allocate memory when creating an interface
device for the indicated interface type.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause Resources on the system are extremely limited.
Action Eliminate the resource limitations and restart the PIC that houses the interface for which
the interface device could not be created.
CHASSISD_IFDEV_RETRY_NOTICE
System Log Message function-name: attempt count to add interface device interface-name failed
(error-message)
Description The chassis process (chassisd) tried the indicated number of times to create the indicated
interface device, but the attempts failed. After generating this message, the chassisd
process waited a while for resources to free up and tried again.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
Cause Necessary resources might have been unavailable. They should become available soon.
CHASSISD_IFDEV_RTSLIB_FAILURE
System Log Message function-name: library-function-name failed (error-message)
Description The chassis process (chassisd) could not create an interface device because an error
occurred during the indicated call to the routing socket library.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_IOCTL_FAILURE
System Log Message function-name: reason for fru-name (error-message)
Copyright © 2010, Juniper Networks, Inc.176
Junos 10.3 System Log Messages Reference
To Next Page
Loading...