Description The chassis process (chassisd) could not perform the indicated ioctl() operation on the
indicated component (field-replaceable unit, or FRU).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_IPC_ANNOUNCE_TIMEOUT
System Log Message function-name: no ack received from fru-type for fru-name fru-slot state change
(0xsent-mask, acks 0xack-mask)
Description The chassis process (chassisd) notified the indicated components (field-replaceable
units, or FRUs) that the component in the indicated slot was changing state. It did not
receive the expected acknowledgment.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_IPC_CONNECTION_DROPPED
System Log Message Dropped IPC connection for fru-name fru-slot
Description The chassis process (chassisd) dropped its interprocess communication (IPC) connection
to the indicated component (field-replaceable unit, or FRU).
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
CHASSISD_IPC_DAEMON_WRITE_ERROR
System Log Message pipe_write failure for connection-id; connection error: error-message (errno error-code)
Description The chassis process (chassisd) could not write to a socket, because of the indicated
error. The socket is for a connection to another process that runs on the Routing Engine
and helps manage the chassis.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
177Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages
To Next Page
Loading...