CHASSISD_IPC_ERROR
System Log Message function-name: error-message
Description An error occurred when the chassis process (chassisd) received an interprocess
communication (IPC) message.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_IPC_FLUSH_ERROR
System Log Message function-name: flush operation failed for fru-name fru-slot
Description The chassis process (chassisd) could not write to a socket that it was using to
communicate with the indicated component (field-replaceable unit, or FRU).
Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_IPC_MSG_DROPPED
System Log Message Dropping message from connection queue: type = message-type, subtype =
message-subtype
Description The chassis process (chassisd) dropped an interprocess communication (IPC) message
because the message queue had already reached maximum capacity.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause The connection to a component (field-replaceable unit, or FRU) no longer exists, so the
chassisd process cannot send all messages immediately as it usually does.
Action Contact your technical support representative.
CHASSISD_IPC_MSG_ERROR
System Log Message function-name: error code error-code, type message-type, subtype message-subtype,
opcode message-opcode
Copyright © 2010, Juniper Networks, Inc.178
Junos 10.3 System Log Messages Reference
To Next Page
Loading...