Description The chassis process (chassisd) detected an error in an interprocess communication (IPC)
message with the indicated characteristics.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_IPC_MSG_FRU_NOT_FOUND
System Log Message function-name: unable to locate FRU for message with type message-type, subtype
message-subtype, opcode message-opcode
Description The chassis process (chassisd) could not locate a component (field-replaceable unit,
or FRU) to handle the interprocess communication (IPC) message with the indicated
characteristics that it received. The message was ignored.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_IPC_MSG_QFULL_ERROR
System Log Message Dropping message from connection queue: type = message-type, subtype =
message-subtype
Description The chassis process (chassisd) had to discard a message because the queue of messages
waiting for a connection was already full.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
CHASSISD_IPC_MSG_UNHANDLED
System Log Message function-name: unable to handle fru-name message with type message-type, subtype
message-subtype, length length, opcode message-opcode, error error-code
Description The chassis process (chassisd) received an interprocess communication (IPC) message
about the indicated FRU. The message had the indicated characteristics. The chassisd
process could not handle the message.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
179Copyright © 2010, Juniper Networks, Inc.
Chapter 18: CHASSISD System Log Messages
To Next Page
Loading...