Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

CHASSISD_PIC_CMD_GIVEUP
System Log Message function-name: attempt fpc-slot to bring PIC pic-slot in FPC count online timed out;
stopped trying
Description The chassis process (chassisd) tried the indicated number of times to bring the indicated
PIC online, but stopped trying after all attempts failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_PIC_CMD_TIMEOUT
System Log Message function-name: attempt to bring PIC pic-slot in FPC fpc-slot online timed out
Description The chassis process (chassisd) tried to bring the indicated PIC online. The attempt took
longer than the standard time allotted for that operation.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
CHASSISD_PIC_CONFIG_ERROR
System Log Message Unable to create interface devices during attachment of PIC pic-slot in FPC fpc-slot:
graceful switchover not supported
Description The chassis process (chassisd) did not create an interface device for the indicated PIC,
because graceful switchover was enabled but is not supported in combination with that
PIC type. A PIC must have an interface device to come online, so it remained offline.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Remove the PIC or upgrade the Junos OS.
CHASSISD_PIC_HWERROR
System Log Message PIC pic-slot in FPC fpc-slot (PIC type pic-type, version version) had hardware error
Description The indicated PIC experienced a hardware error. The chassis process (chassisd) did not
bring the PIC online.
Copyright © 2010, Juniper Networks, Inc.192
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English