Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 268

Facility LOG_DAEMON
CHASSISD_SNMP_TRAP10
System Log Message SNMP trap generated: trap (argument1 value1, argument2 value2, argument3 value3,
argument4 value4, argument5 value5, argument6 value6, argument7 value7, argument8
value8, argument9 value9, argument10 value10)
Description The chassis process (chassisd) generated a Simple Network Management Protocol
(SNMP) trap with the ten indicated argument-value pairs.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
CHASSISD_SNMP_TRAP6
System Log Message SNMP trap generated: trap (argument1 value1, argument2 value2, argument3 value3,
argument4 value4, argument5 value5, argument6 value6)
Description The chassis process (chassisd) generated a Simple Network Management Protocol
(SNMP) trap with the six indicated argument-value pairs.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
CHASSISD_SNMP_TRAP7
System Log Message SNMP trap generated: trap (argument1 value1, argument2 value2, argument3 value3,
argument4 value4, argument5 value5, argument6 value6, argument7 value7)
Description The chassis process (chassisd) generated a Simple Network Management Protocol
(SNMP) trap with the seven indicated argument-value pairs.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
CHASSISD_SPI_IOCTL_FAILURE
System Log Message function-name: reason 0xaddress, error error-message
Description The chassis process (chassisd) could not perform the indicated ioctl() operation on the
indicated register of the spi device.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.204
Junos 10.3 System Log Messages Reference