Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

COSD_DB_OPEN_FAILED
System Log Message Unable to open configuration database: error-message(name)
Description The class-of-service (CoS) process (cosd) could not read configuration data for the
indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause The specified database does not exist
Action Contact your technical support representative.
COSD_EXACT_RATE_UNSUPP_INTERFACE
System Log Message Unable to apply scheduler map scheduler-map to interface interface-name because it
does not support exact-rate transmission
Description The class-of-service (CoS) process (cosd) did not apply the indicated scheduler map
to the indicated interface, because a scheduler named in the scheduler map specifies
exact transmission rate. The interface is housed on a type of PIC that does not support
exact transmission rate, such as an IQ2 PIC. In terms of configuration, the 'exact' statement
is included in the scheduler definition at the [edit class-of-service schedulers
<scheduler-name> transmit-rate (<rate> | percent <percentage>)] hierarchy level. The
scheduler is included in the scheduler map that is applied to the interface.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Remove the 'exact' statement from the scheduler in the scheduler map applied to the
interface.
COSD_EXACT_RATE_UNSUPP_SESSION
System Log Message Unable to apply CoS to L2TP session session-id, because scheduler map scheduler-map
specifies exact rate transmission
Description The class-of-service (CoS) process (cosd) did not apply CoS settings to the indicated
Layer 2 Tunneling Protocol (L2TP) session, because the scheduler map specified by the
RADIUS server for the session is configured for exact transmission rate. Exact transmission
rate is not supported for L2TP sessions on the type of PIC that houses the interface, such
as an IQ2 PIC. In terms of configuration, the 'exact' statement is included in a scheduler
definition at the [edit class-of-service schedulers <scheduler-name> transmit-rate
(<rate> | percent <percentage>)] hierarchy level. The scheduler is included in a scheduler
map that is associated with a traffic control profile. The traffic control profile is named
215Copyright © 2010, Juniper Networks, Inc.
Chapter 20: COSD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English