EasyManua.ls Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Severity error
Facility LOG_DAEMON
Action Include the 'per-session-scheduler' statement in the configuration for the interface.
COSD_L2TP_COS_NOT_SUPPORTED
System Log Message Unable to apply CoS to L2TP session session-id on interface interface-name: it does not
support CoS
Description The class-of-service (CoS) process (cosd) did not apply CoS settings to the indicated
Layer 2 Tunneling Protocol (L2TP) session on the indicated interface. The interface is
configured to support session-aware CoS for L2TP, but is not on a PIC that supports that
feature, such as an IQ2 PIC. In terms of configuration, the 'per-session-scheduler'
statement is included at the [edit interfaces <interface-name> unit
<logical-unit-number>] hierarchy level.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Determine whether the interface is on an PIC that supports session-aware CoS; if not,
remove the 'per-session-scheduler' statement.
COSD_L2TP_SHAPING_NOT_CONFIGURED
System Log Message Unable to apply CoS to L2TP session session-id because session-aware shaping is not
enabled for interface interface-name
Description The class-of-service (CoS) process (cosd) did not apply CoS settings to the indicated
Layer 2 Tunneling Protocol (L2TP) session on the indicated interface, because
session-aware traffic shaping for L2TP is not configured on the PIC that houses the
interface. In terms of configuration, the 'session-shaping' statement is not included at
the [edit chassis fpc <slot-number> pic <pic-number> traffic-manager mode] hierarchy
level.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Include the 'session-shaping' statement in the configuration for the PIC.
COSD_LARGE_DELAY_BUFFER_INVALID
System Log Message Error for interface interface-name error-message
Description The class-of-service (CoS) process (cosd) did not apply the large delay buffer setting
that is configured for the indicated interface.
219Copyright © 2010, Juniper Networks, Inc.
Chapter 20: COSD System Log Messages

Table of Contents

Related product manuals