Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity alert
Facility LOG_DAEMON
ESWD_ST_CTL_BW_INFO
System Log Message interface-name: configured storm control speed level is greater than interface speed
bandwidth. Storm control will be set to the latter
Description Log message to alert the user to the bandwidth setting limits.
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
ESWD_ST_CTL_ERROR_DISABLED
System Log Message interface-name: storm control disabled port
Description This condition occurs when storm control error condition is detected.
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
ESWD_ST_CTL_ERROR_ENABLED
System Log Message interface-name: storm control enabled port
Description This condition occurs when storm-control error condition is cleared.
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
ESWD_ST_CTL_INFO
System Log Message interface-name: storm control will default to 80 percent of link speed
Description Log message to alert the user to the storm control setting.
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
ESWD_SYSTEM_CALL_FAILED
System Log Message reason: error-message
Description A system call made by enterprise switching process (eswd) failed.
255Copyright © 2010, Juniper Networks, Inc.
Chapter 26: ESWD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English