Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010

Action Contact your technical support representative.
ESWD_STP_BASE_MAC_ERROR
System Log Message Failed to get error-message. All modules will remain disabled.
Description This condition occurs when STP cannot derive the base MAC address of the system.
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
ESWD_STP_LOOP_PROTECT_CLEARED
System Log Message interface-name: loop protect cleared for instance instance-id
Description This condition occurs when STP loop protect condition is cleared.
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
ESWD_STP_LOOP_PROTECT_IN_EFFECT
System Log Message interface-name: loop protect in effect for instance instance-id
Description This condition occurs when STP loop protect condition occurs.
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
ESWD_STP_ROOT_PROTECT_CLEARED
System Log Message interface-name: root protect cleared for instance instance-id
Description This condition occurs when STP root protect condition is cleared.
Type Error: An error occurred
Severity alert
Facility LOG_DAEMON
ESWD_STP_ROOT_PROTECT_IN_EFFECT
System Log Message interface-name: root protect in effect for instance instance-id
Description This condition occurs when STP root protect condition occurs.
Type Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.254
Junos 10.3 System Log Messages Reference