Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description While trying to establish the nonstop routing mirror connection between the master and
standby Routing Engines, the layer2 control protocol process (l2cpd) determined that
the version of the nonstop routing mirror software on the Routing Engines did not match.
Type Error: An error occurred
Severity warning
Facility LOG_DAEMON
Cause The master and standby Routing Engines are running incompatable versions of the JUNOS
software.
Action Update the JUNOS software on the master Routing Engine, standby Routing Engine, or
both, so that they are running compatible versions.
ESWD_MODULE_SHUTDOWN_FAILURE
System Log Message ESWD: error-message Module shutdown failed
Description While deleting the instance of logical-switch, RST/MST Module shutdown failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
ESWD_PPM_READ_ERROR
System Log Message Read error on pipe from ppmd: reason (error-message)
Description The ethernet bridging process (eswd) could not read a message available on the read
pipe from the periodic packet management process (ppmd).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
ESWD_PPM_WRITE_ERROR
System Log Message function-name: write error on pipe to ppmd (error-message)
Description The ethernet bridging process (eswd) could not write a message on the pipe to the
periodic packet management process (ppmd).
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
253Copyright © 2010, Juniper Networks, Inc.
Chapter 26: ESWD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English