KMD_PM_PHASE1_POLICY_LOOKUP_FAIL
System Log Message Unable to retrieve Phase 1 policy from negotiation-role (local peer local-peer, remote
peer remote-peer)
Description The key management process (kmd) could not retrieve a policy from the indicated
participant to use during Internet Key Exchange (IKE) Phase 1 negotiation between the
indicated local and remote peers.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_PHASE1_POLICY_NOT_FOUND
System Log Message Unable to find policy for Phase 1 negotiation between local peer local-peer and remote
peer remote-peer in service set service-set
Description The key management process (kmd) could not retrieve a policy for Internet Key Exchange
(IKE) Phase 1 negotiation between the indicated local and remote peers in the indicated
service set. As a result, Phase 1 did not begin.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_PHASE1_POLICY_SEARCH_FAIL
System Log Message No ike-policy found for ike-access-profile: access-profile, instance:service-set
Description The key management process (kmd) could not retrieve the Phase 1 policy referenced by
the indicated Internet Key Exchange (IKE) access profile for the indicated
dynamic-endpoint service set.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_PHASE1_PROTO_INVALID
System Log Message Phase 1 transform specified invalid protocol received-value instead of
SSH_IKE_PROTOCOL_ISAKMP (expected-value)
Description The indicated protocol in a transform negotiated during Internet Key Exchange (IKE)
Phase 1 is not a valid value. The only valid value is the Internet Security Association and
Key Management Protocol (ISAKMP). The key management process (kmd) rejected the
transform.
Type Error: An error occurred
337Copyright © 2010, Juniper Networks, Inc.
Chapter 43: KMD System Log Messages
To Next Page
Loading...