Severity error
Facility LOG_AUTH
KMD_PM_PHASE1_PROTO_NOT_ISAKMP
System Log Message Protocol in IKE Phase 1 proposal was not ISAKMP as expected
Description The protocol in an Internet Key Exchange (IKE) Phase 1 proposal was not the expected
value, which is the Internet Security Association and Key Management Protocol (ISAKMP).
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_PHASE1_PROTO_TWICE
System Log Message Phase 1 transform included protocol protocol-id twice
Description A transform negotiated during Internet Key Exchange (IKE) Phase 1 specified the indicated
protocol twice, which is invalid. The key management process (kmd) rejected the
transform.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_PHASE1_TXFORM_INCOMPLETE
System Log Message Phase 1 transform was missing mandatory attributes
Description A transform negotiated during Internet Key Exchange (IKE) Phase 1 did not include values
for all attributes. One or more the following was missing: the authentication algorithm,
encryption algorithm, or Diffie-Hellman group. The key management process (kmd)
rejected the transform.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_PHASE1_TXFORM_INVALID
System Log Message Phase 1 transform specified invalid transform ID received-value instead of expected-value
Description The indicated identifier for a transform negotiated during Internet Key Exchange (IKE)
Phase 1 is not the indicated expected value. The key management process (kmd) rejected
the transform.
Type Error: An error occurred
Severity error
Copyright © 2010, Juniper Networks, Inc.338
Junos 10.3 System Log Messages Reference
To Next Page
Loading...