EasyManuals Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #406 background imageLoading...
Page #406 background image
Severity error
Facility LOG_AUTH
KMD_PM_PROTO_NOT_NEGOTIATED
System Log Message No protocol negotiated for SA sa-name
Description While verifying the results of Internet Key Exchange (IKE) Phase 2, the key management
process (kmd) determined that no protocol was negotiated for the indicated security
association (SA). The SA was not established.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_REMOTE_PEER_INVALID
System Log Message Phase 1 negotiation failed: remote address remote-peer in instance service-set is invalid
Description Internet Key Exchange (IKE) Phase 1 negotiation failed because the indicated remote
peer address in the indicated service set is not a valid IP version 4 (IPv4) or IP version 6
(IPv6) address.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_SA_CFG_NOT_FOUND
System Log Message Unable to install negotiated Phase 2 values: SA sa-name configuration not found
Description The key management process (kmd) could not retrieve configuration information for the
indicated security association (SA), and so could not record the values that were
negotiated for the SA during Internet Key Exchange (IKE) Phase 2. The SA was not
established.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_SA_DELETE_REJECT
System Log Message Rejected SA deletion request for service set service-set: SPI size (size) is not 4 (local peer
local-address:local-port, remote peer remote-address:remote-port)
Description The key management process (kmd) discarded a message that requested deletion of a
security association (SA) between the indicated local peer (address and port) and remote
peer (address and port), because the indicated size of the associated Security Parameter
Index (SPI) was not as expected. As a result, the SA was not deleted.
Copyright © 2010, Juniper Networks, Inc.342
Junos 10.3 System Log Messages Reference

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 and is the answer not in the manual?

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General IconGeneral
BrandJuniper
ModelJUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
CategorySoftware
LanguageEnglish

Related product manuals