Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_SA_INDEX_GEN_FAILED
System Log Message Unable to generate pair index for SA sa-name in service set service-set
Description The key management process (kmd) could not generate a pair index for the indicated
security association (SA) in the indicated service set. The kmd process canceled Internet
Key Exchange (IKE) Phase 2 negotiation.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_SA_PEER_ABSENT
System Log Message No active peer found in tunnel configuration block sa-name
Description Failed to find active peer information in the tunnel configuration block. Hence unable to
send SA delete notifications to the peer.
Type Error: An error occurred
Severity error
Facility LOG_SYSLOG
KMD_PM_SA_PEER_NOT_FOUND
System Log Message Unable to find active peer for SA sa-name
Description The key management process (kmd) could not retrieve information about an active peer
from the configuration for the indicated security association (SA). As a result, it could
not notify peers that an SA was deleted.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_PM_SPI_DELETE_REJECT
System Log Message IKE Phase-2 delete:In instance service-set rejecting request to delete SPI size sizeu != 4
Local gateway local-address:local-port, Remote gateway remote-address:remote-port
Description The SPI size in the delete notification is invalid. Hence delete request is rejected. Quick
Mode notification payload is dropped.
Type Error: An error occurred
Severity error
343Copyright © 2010, Juniper Networks, Inc.
Chapter 43: KMD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English