Facility LOG_AUTH
KMD_SNMP_PIC_CONNECTION_FAILED
System Log Message Unable to connect to PIC pic-slot; SNMP query failed
Description The key management process (kmd) could not open a connection to the indicated PIC.
As a result, it could not retrieve Simple Network Management Protocol (SNMP) statistics
about IP Security (IPSec) security associations (SAs).
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_SNMP_PIC_NO_RESPONSE
System Log Message PIC pic-slot did not respond to SNMP query: error-message
Description The indicated PIC did not respond to a request from the key management process (kmd)
for Simple Network Management Protocol (SNMP) statistics about IP Security (IPSec)
security associations (SAs).
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_SNMP_PIC_SLOT_NOT_FOUND
System Log Message Unable to retrieve slot information for PIC pic-slot; SNMP query failed
Description The key management process (kmd) could not retrieve information about the slot housing
the indicated PIC. As a result, it could not retrieve Simple Network Management Protocol
(SNMP) statistics about IP Security (IPSec) security associations (SAs) from the PIC.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_VPN_DFBIT_STATUS_MSG
System Log Message The DF-BIT for VPN vpn-name has been set to argument.
Description VPN DF bit status has been set.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
347Copyright © 2010, Juniper Networks, Inc.
Chapter 43: KMD System Log Messages
To Next Page
Loading...