KMD_SNMP_EXTRA_RESPONSE
System Log Message PIC pic-slot sent additional response after reply to SNMP query: error-message
Description The indicated PIC sent an additional unexpected message after it responded to a request
from the key management process (kmd) for Simple Network Management Protocol
(SNMP) statistics about IP Security (IPSec) security associations (SAs). As a result, the
kmd process discarded the initial response.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_SNMP_FATAL_ERROR
System Log Message Fatal SNMP error occurred: error-message
Description The key management process (kmd) could not retrieve Simple Network Management
Protocol (SNMP) statistics about IP Security (IPSec) security associations (SAs), because
the indicated fatal SNMP error occurred.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_SNMP_IKE_SERVER_NOT_FOUND
System Log Message Unable to fulfill SNMP request: could not fetch IKE server context for service set service-set
Description The key management process (kmd) could not retrieve the Internet Key Exchange (IKE)
server context for the indicated service set. As a result, it could not process a request for
Simple Network Management Protocol (SNMP) statistics.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
KMD_SNMP_MALLOC_FAILED
System Log Message Unable to allocate memory for reply buffer; SNMP query to PIC pic-slot failed
Description The key management process (kmd) could not allocate memory for the buffer it uses
to store Simple Network Management Protocol (SNMP) statistics about IP Security
(IPSec) security associations (SAs). As a result, it could not retrieve statistics from the
indicated PIC.
Type Error: An error occurred
Severity error
Copyright © 2010, Juniper Networks, Inc.346
Junos 10.3 System Log Messages Reference
To Next Page
Loading...
Need help?
General
