Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010

Facility LOG_DAEMON
Action Contact your technical support representative.
L2ALD_NAME_LENGTH_IF_DEVICE
System Log Message Unable to add interface device interface-name; name exceeds limit of length characters
Description The Layer 2 address learning process (l2ald) did not add an entry for the indicated
interface device to the interface table, because its name exceeds the indicated limit on
the number of characters.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
L2ALD_NAME_LENGTH_IF_FAMILY
System Log Message Unable to add interface family interface-family; name exceeds limit of length characters
Description The Layer 2 address learning process (l2ald) did not add an entry for the indicated
interface family to the interface table, because its name exceeds the indicated limit on
the number of characters.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
L2ALD_NAME_LENGTH_IF_LOGICAL
System Log Message Unable to add logical interface interface-name; name exceeds limit of length characters
Description The Layer 2 address learning process (l2ald) did not add an entry for the indicated logical
interface to the interface table, because its name exceeds the indicated limit on the
number of characters.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
355Copyright © 2010, Juniper Networks, Inc.
Chapter 44: L2ALD System Log Messages