the indicated count of learned addresses no longer exceeds the limit configured for the
instance.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
Cause The probable reason that the count of addresses went below the limit is that addresses
in the table reached the age limit and were removed.
L2ALD_MAC_MOVE_NOTIFICATION
System Log Message MAC Moves detected in the system
Description When the same MAC address is learned on a different interface, or on the same interface
but a different unit number, it is considered a MAC move. When this happens frequently
for a specific time duration, a notification is sent
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
Cause The probable reason for mac moves is the loops in the topology or some kind of
misconfiguration.
L2ALD_MALLOC_FAILED
System Log Message Unable to allocate memory: error-message
Description The Layer 2 address learning process (l2ald) could not allocate memory while creating
a data structure.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
L2ALD_MANAGER_CONNECT
System Log Message Unable to create pipe to Layer 2 address-learning manager: error-message
Description The Layer 2 address learning process (l2ald) could not open a pipe for interprocess
communication (IPC) with a Layer 2 address-learning manager process.
Type Error: An error occurred
Severity error
Copyright © 2010, Juniper Networks, Inc.354
Junos 10.3 System Log Messages Reference
To Next Page
Loading...