Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The Layer 2 address learning process (l2ald) resumed adding addresses to the MAC
address table that were learned by interfaces in the indicated bridging domain, because
the indicated count of learned addresses no longer exceeds the limit configured for the
domain.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
Cause The probable reason that the count of addresses went below the limit is that addresses
in the table reached the age limit and were removed.
L2ALD_MAC_LIMIT_RESET_GLOBAL
System Log Message Resumed adding MAC addresses for router; current count is count
Description The Layer 2 address learning process (l2ald) resumed adding addresses to the MAC
address table, because the indicated count of learned addresses no longer exceeds the
configured limit.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
Cause The probable reason that the count of addresses went below the limit is that addresses
in the table reached the age limit and were removed.
L2ALD_MAC_LIMIT_RESET_IF
System Log Message Resumed adding MAC addresses learned by interface-name; current count is count
Description The Layer 2 address learning process (l2ald) resumed adding addresses to the MAC
address table that were learned by the indicated interface, because the indicated count
of learned addresses no longer exceeds the limit configured for the interface.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
Cause The probable reason that the count of addresses went below the limit is that addresses
in the table reached the age limit and were removed.
L2ALD_MAC_LIMIT_RESET_RTT
System Log Message Resumed adding MAC addresses learned from routing instance 'routing-instance'; current
count is count
Description The Layer 2 address learning process (l2ald) resumed adding addresses to the MAC
address table that were learned by interfaces in the indicated bridging domain, because
353Copyright © 2010, Juniper Networks, Inc.
Chapter 44: L2ALD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English