Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Action Increase the limit on addresses learned by the interface by increasing the value of the
'interface-mac-limit' statement at the appropriate location under the [edit
routing-instances <routing-instance-name> bridge-domains <bridge-domain-name>
bridge-options] or the [edit routing-instances <routing-instance-name> protocols vpls]
hierarchy level.
L2ALD_MAC_LIMIT_REACHED_IFBD
System Log Message Limit on learned MAC addresses reached for interface-name; current count is count
Description The Layer 2 address learning process (l2ald) stopped adding addresses to the MAC
address table that were learned by the indicated interface:vlan-id, because the indicated
count of learned addresses exceeds the limit configured for the interface:vlan-id.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
Action Increase the limit on addresses learned by the interface by increasing the value of the
'interface-mac-limit' statement at the appropriate location under the [edit
routing-instances <routing-instance-name> bridge-domains <bridge-domain-name>
bridge-options] or the [edit routing-instances <routing-instance-name> protocols vpls]
hierarchy level.
L2ALD_MAC_LIMIT_REACHED_RTT
System Log Message Limit on learned MAC addresses reached for routing instance 'routing-instance'; current
count is count
Description The Layer 2 address learning process (l2ald) stopped adding addresses to the MAC
address table that were learned by interfaces in the indicated routing instance, because
the indicated count of learned addresses exceeds the configured or default limit for the
routing instance.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
Action Increase the limit on addresses learned by interfaces in the routing-instance, by increasing
the value of the 'interface-mac-limit' statement at the [edit routing-instances
<routing-instance-name> protocol l2-learning] or the [edit routing-instances
<routing-instance-name> protocols vpls] hierarchy level.
L2ALD_MAC_LIMIT_RESET_BD
System Log Message Resumed adding MAC addresses learned from routing instance 'routing-instance', domain
'bridge-domain:vlan-id'; current count is count
Copyright © 2010, Juniper Networks, Inc.352
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English