Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
L2CPD_RUNTIME_MODULE
System Log Message function-name: runtime was excessive (time) during action of module
Description The indicated operation on the indicated submodule of the Layer 2 Control Protocol
process (l2cpd) ran uninterrupted for the indicated period of time, which is considered
excessive.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
Cause The message was logged because task accounting is enabled. The function might be
implemented inefficiently.
L2CPD_RUNTIME_OPERATION
System Log Message function-name: runtime was excessive (time) during action of module
Description The indicated operation on the indicated submodule of the Layer 2 Control Protocol
process (l2cpd) ran uninterrupted for the indicated period of time, which is considered
excessive.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
Cause The message was logged because task accounting is enabled. The function might be
implemented inefficiently.
L2CPD_RUNTIME_TASK
System Log Message function-name: runtime was excessive (total-time [user-time user, system-time system])
doing action
Description While performing the indicated operation, the indicated function in the Layer 2 Control
Protocol process (l2cpd) ran uninterrupted for the indicated period of time (the sum of
the indicated user and system times), which is considered excessive.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
363Copyright © 2010, Juniper Networks, Inc.
Chapter 45: L2CPD System Log Messages
To Next Page
Loading...