Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

L2TPD_MLPPP_BUNDLE_CREATE_FAILED
System Log Message Unable to create MLPPP bundle (L2TP tunnel tunnel-id, session session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not create a multilink Point-to-Point
Protocol (MLPPP) bundle in the indicated tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_MLPPP_BUNDLE_INVALID_ID
System Log Message MLPPP bundle ID was invalid
Description The identifier assigned to a multilink Point-to-Point Protocol (MLPPP) bundle was invalid.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_MLPPP_COPY_CFG_FAILED
System Log Message Unable to copy MLPPP configuration (L2TP tunnel tunnel-id, session session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not copy the multilink Point-to-Point
Protocol (MLPPP) configuration for the indicated tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_MLPPP_ID_ALLOC_FAILED
System Log Message Unable to allocate MLPPP ID map
Description The Layer 2 Tunneling Protocol process (l2tpd) could not allocate memory for a multilink
Point-to-Point Protocol (MLPPP) identifier map data structure.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_MLPPP_ID_BITMAP_ALLOC_FAIL
System Log Message Unable to allocate bitmap field for MLPPP ID map
Description The Layer 2 Tunneling Protocol process (l2tpd) could not allocate memory for a bitmap
field in a multilink Point-to-Point Protocol (MLPPP) identifier map data structure.
377Copyright © 2010, Juniper Networks, Inc.
Chapter 46: L2TPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English