Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_MLPPP_ID_NODE_ADD_FAILED
System Log Message Unable to add node for bundle bundle to MLPPP ID map
Description The Layer 2 Tunneling Protocol process (l2tpd) could not add a node for the indicated
multilink Point-to-Point Protocol (MLPPP) bundle to an MLPPP identifier map data
structure.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_MLPPP_ID_ROOT_ALLOC_FAILED
System Log Message Unable to allocate root node for MLPPP ID map
Description The Layer 2 Tunneling Protocol process (l2tpd) could not allocate the root note for a
multilink Point-to-Point Protocol (MLPPP) identifier map data structure.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_MLPPP_LINK_CREATE_FAILED
System Log Message Unable to create MLPPP bundle links (L2TP tunnel tunnel-id, session session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not create multilink Point-to-Point
Protocol (MLPPP) bundle links for the indicated tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_MLPPP_LINK_MAX_EXCEEDED
System Log Message Unable to add link: maximum number of sessions exceeded for MLPPP bundle bundle
(L2TP tunnel tunnel-id, session session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not add a link for the indicated
multilink Point-to-Point Protocol (MLPPP) bundle in the indicated tunnel and session,
because the maximum number of links was exceeded.
Type Error: An error occurred
Severity error
Copyright © 2010, Juniper Networks, Inc.378
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English