Facility LOG_NEWS
L2TPD_MLPPP_POOL_ADDRESS_FAILED
System Log Message Unable to assign pool address for MLPPP bundle bundle (L2TP tunnel tunnel-id, session
session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not assign a pool address for the
indicated multilink Point-to-Point Protocol (MLPPP) bundle in the indicated tunnel and
session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_MLPPP_SESSION_CREATE_FAIL
System Log Message Unable to create MLPPP session (L2TP tunnel tunnel-id, session session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not create a multilink Point-to-Point
Protocol (MLPPP) session for the indicated tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_MLPPP_SESSION_DELETE_FAIL
System Log Message Unable to delete session for MLPPP bundle bundle (L2TP tunnel tunnel-id, session
session-id, errno error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not delete the session configuration
for the indicated multilink Point-to-Point Protocol (MLPPP) bundle in the indicated
tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_MLPPP_SPEED_MISMATCH
System Log Message Unable to add link: speed differs for bundle bundle (L2TP tunnel tunnel-id, session
session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not add a link for the indicated
multilink Point-to-Point Protocol (MLPPP) bundle in the indicated tunnel and session,
because the bundle speed does not match.
Type Error: An error occurred
Severity error
379Copyright © 2010, Juniper Networks, Inc.
Chapter 46: L2TPD System Log Messages
To Next Page
Loading...