Description The Layer 2 Tunneling Protocol process (l2tpd) did not use the indicated RADIUS server
because it could not retrieve the indicated routing instance specified for the server.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RADIUS_SERVER_NOT_FOUND
System Log Message Unable to find RADIUS server (tunnel tunnel-id, session session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not locate a RADIUS server during
Point-to-Point Protocol (PPP) authentication of the indicated tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RADIUS_SRC_ADDR_BIND_FAIL
System Log Message Ignoring RADIUS server radius-server: unable to bind to source address source-address
(error-message)
Description The Layer 2 Tunneling Protocol process (l2tpd) did not use the indicated RADIUS server
because it could not bind to the indicated source address.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RADIUS_SRC_ADDR_ENOENT
System Log Message Ignoring RADIUS server radius-server: source address source-address did not exist
Description The Layer 2 Tunneling Protocol process (l2tpd) did not use the indicated RADIUS server
because the indicated source address did not exist in the routing instance for the server.
Type Error: An error occurred
Severity notice
Facility LOG_NEWS
L2TPD_RPD_ASYNC_UNREG_FAILED
System Log Message Unable to unregister with rpd (return-value)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not unregister asynchronously with
the routing protocol process (rpd).
Type Error: An error occurred
383Copyright © 2010, Juniper Networks, Inc.
Chapter 46: L2TPD System Log Messages