Severity error
Facility LOG_NEWS
L2TPD_RPD_ROUTE_ADD_CB_FAILED
System Log Message Unable to add route address/prefix-length asynchronously (gateway gateway-id
[gateway-name], L2TP tunnel tunnel-id, session session-id): error-code
Description The Layer 2 Tunneling Protocol process (l2tpd) could not add a route on an asynchronous
callback for the indicated address and prefix, gateway, tunnel, and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RPD_ROUTE_ADD_FAILED
System Log Message Unable to add route address/prefix-length (gateway gateway-id [gateway-name], L2TP
tunnel tunnel-id, session session-id): error-message (error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not add a route for the indicated
address and prefix, gateway, tunnel, and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RPD_ROUTE_DELETE_CB_FAILED
System Log Message Unable to delete route address/prefix-length asynchronously (gateway gateway-id
[gateway-name], L2TP tunnel tunnel-id, session session-id): error-code
Description The Layer 2 Tunneling Protocol process (l2tpd) could not delete a route on an
asynchronous callback for the indicated address and prefix, gateway, tunnel, and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RPD_ROUTE_DELETE_FAILED
System Log Message Unable to delete route address/prefix-length (gateway gateway-id [gateway-name],
L2TP tunnel tunnel-id, session session-id): error-message (error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not delete a route for the indicated
address and prefix, gateway, tunnel, and session.
Type Error: An error occurred
Severity error
Copyright © 2010, Juniper Networks, Inc.384
Junos 10.3 System Log Messages Reference
To Next Page
Loading...