Facility LOG_NEWS
L2TPD_RPD_ROUTE_PREFIX_TOO_LONG
System Log Message Unable to add route address/prefix-length: prefix too long (L2TP tunnel tunnel-id, session
session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not add a route for the indicated
address and prefix, tunnel, and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RPD_SESS_CREATE_FAILED
System Log Message Unable to establish session with rpd (error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not establish a session with the
routing protocol process (rpd).
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RPD_SESS_HANDLE_ALLOC_FAIL
System Log Message Unable to allocate session handle for rpd connection: error-message (error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not allocate a session handle while
attempting to initialize a connection to the routing protocol process (rpd).
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RPD_SOCKET_ALLOC_FAILED
System Log Message Unable to allocate socket address for rpd connection
Description The Layer 2 Tunneling Protocol process (l2tpd) could not allocate a socket address
structure while attempting to initialize a connection to the routing protocol process (rpd).
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RPD_TBL_LOCATE_BY_NAME
System Log Message Unable to locate rpd table by name: error-message (error-code)
385Copyright © 2010, Juniper Networks, Inc.
Chapter 46: L2TPD System Log Messages
To Next Page
Loading...