Description The Layer 2 Tunneling Protocol process (l2tpd) attempted to retrieve a routing protocol
process table by providing the table name. The attempt failed.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RPD_TBL_LOCATE_FAILED
System Log Message Unable to locate table table-name for identifier (return-value)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not retrieve the indicated routing
protocol process table.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RPD_VERSION_MISMATCH
System Log Message Versions of rpd and librpd did not match; not retrying
Description The Layer 2 Tunneling Protocol process (l2tpd) determined that the versions of the
routing protocol process (rpd) and routing protocol library (librpd) were different. It
halted its attempt to connect to the rpd process.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RTSLIB_ASYNC_OPEN_FAILED
System Log Message Unable to open asynchronous routing socket connection
Description The Layer 2 Tunneling Protocol process (l2tpd) could not open a routing socket connection
asynchronously. It uses the connection to communicate with the Junos operating system
kernel.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_RTSLIB_OPEN_FAILED
System Log Message Unable to open routing socket connection
Description The Layer 2 Tunneling Protocol process (l2tpd) could not open a routing socket
connection, which it uses to communicate with the Junos operating system kernel.
Copyright © 2010, Juniper Networks, Inc.386
Junos 10.3 System Log Messages Reference