Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SERVER_START_FAILED
System Log Message Startup of L2TP server failed
Description The Layer 2 Tunneling Protocol (L2TP) server did not start.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SERVICE_NH_ADD_FAILED
System Log Message Unable to add service next hop (L2TP tunnel tunnel-id, session session-id): error-message
(error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) maintains a copy of the Junos
configuration database in memory. It could not add information about a service next hop
to the in-memory configuration for the indicated tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SERVICE_NH_DELETE_FAILED
System Log Message Unable to remove service next hop next-hop (VRF vrf, L2TP tunnel tunnel-id, session
session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) maintains a copy of the Junos
configuration database in memory. It could not remove information about the indicated
service next hop from the in-memory configuration for the indicated tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SESSION_CFG_ADD_ERROR
System Log Message Unable to add L2TP tunnel tunnel-id, session session-id to PIC configuration (errno
error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) maintains a copy of the Junos
configuration database in memory. It could not add information about the indicated
session and tunnel to the in-memory configuration for the PIC.
387Copyright © 2010, Juniper Networks, Inc.
Chapter 46: L2TPD System Log Messages
To Next Page
Loading...