EasyManua.ls Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 454

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Description The Layer 2 Tunneling Protocol process (l2tpd) could not delete information about a
session from the configuration information for a logical interface.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SESSION_IFL_GET_FAILED
System Log Message function-name: unable to find interface interface-name
Description The Layer 2 Tunneling Protocol process (l2tpd) could not retrieve configuration
information about the indicated logical interface, to which it was going to add session
information.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SESSION_IFL_NOT_EQUAL
System Log Message function-name: interface interface-name not equal
Description The Layer 2 Tunneling Protocol process (l2tpd) could not add a session for the indicated
logical interface.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SESSION_IFL_NOT_FOUND
System Log Message Unable to find interface interface-name (L2TP tunnel tunnel-id, session session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not find the indicated logical
interface corresponding to the indicated tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SESSION_IFL_OCCUPIED
System Log Message function-name: interface interface-name already has associated session (value1/value2)
Description The Layer 2 Tunneling Protocol process (l2tpd) determined that the indicated logical
interface already had an associated session.
Type Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.390
Junos 10.3 System Log Messages Reference

Table of Contents

Related product manuals