Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity error
Facility LOG_NEWS
L2TPD_SESSION_IFL_REMOVE_FAILED
System Log Message Unable to remove L2TP tunnel tunnel-id, session session-id from logical interface (errno
error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not remove information about the
indicated tunnel and session from the record it maintains for a logical interface.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SESSION_INVALID_PEER_IP
System Log Message Invalid peer address peer-address in IPCP UP (L2TP tunnel tunnel-id, session session-id);
closing session
Description The Layer 2 Tunneling Protocol process (l2tpd) received an IP Control Protocol (IPCP)
'UP' message for the indicated tunnel and session that included the indicated IP address
for a peer. The address was invalid, and the l2tpd process started closing down the
session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SESSION_ROUTE_ADD_FAILED
System Log Message Unable to add PPP route (L2TP tunnel tunnel-id, session session-id, errno error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not add a Point-to-Point Protocol
(PPP) route for the indicated tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SESSION_RT_TBL_NOT_FOUND
System Log Message Unable to find route table table-id for interface interface-name (L2TP tunnel tunnel-id,
session session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not retrieve the indicated routing
table associated with the indicated logical interface in the indicated tunnel and session.
Type Error: An error occurred
391Copyright © 2010, Juniper Networks, Inc.
Chapter 46: L2TPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English