Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity error
Facility LOG_NEWS
L2TPD_SESSION_TUNNEL_ID_MISMATCH
System Log Message Tunnel ID tunnel-id in message does not match L2TP tunnel l2tp-tunnel-id, session
session-id
Description The Layer 2 Tunneling Protocol process (l2tpd) received a message with the indicated
tunnel identifier, which did not match the identifier stored for the indicated tunnel and
session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SETSOCKOPT_FAILED
System Log Message setsockopt() failed operation: error-message
Description The Layer 2 Tunneling Protocol process (l2tpd) could not set socket options during the
indicated operation.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SET_ASYNC_CONTEXT
System Log Message Unable to set asynchronous context (errno error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not set asynchronous context for
a routing socket connection, which it uses to communicate with the Junos operating
system kernel.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SHOW_MULTILINK
System Log Message Detail level level is not supported by 'show services l2tp multilink' command
Description The 'show services l2tp multilink' command was issued with the indicated option to
specify the amount of information to return, but the command does not support that
option.
Type Error: An error occurred
Severity error
Copyright © 2010, Juniper Networks, Inc.392
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English