Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Facility LOG_NEWS
L2TPD_SHOW_SESSION
System Log Message Detail level level is not supported by 'show services l2tp session' command
Description The 'show services l2tp session' command was issued with the indicated option to specify
the amount of information to return, but the command does not support that option.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SHOW_TUNNEL
System Log Message Detail level level is not supported by 'show services l2tp tunnel' command
Description The 'show services l2tp tunnel' command was issued with the indicated option to specify
the amount of information to return, but the command does not support that option.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SOCKET_FAILED
System Log Message socket() failed operation: error-message
Description The Layer 2 Tunneling Protocol process (l2tpd) could not open socket during the indicated
operation.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_SUBUNIT_ROUTE_ALLOC_FAILED
System Log Message Unable to allocate L2TP route (tunnel tunnel-id, session session-id)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not allocate a subunit route record
for the indicated tunnel and session.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_TRACE_FILE_OPEN_FAILED
System Log Message Unable to open trace file: error-message
Description The Layer 2 Tunneling Protocol process (l2tpd) could not open its trace file.
393Copyright © 2010, Juniper Networks, Inc.
Chapter 46: L2TPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English