Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_TUNNEL_CFG_ADD_FAILED
System Log Message Unable to add L2TP tunnel tunnel-id to PIC configuration (errno error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) maintains a copy of the Junos
configuration database in memory. It could not add information about the indicated
tunnel to the in-memory configuration for the PIC.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_TUNNEL_CFG_ADD_INV_ADDR
System Log Message Unable to add L2TP tunnel tunnel-id to PIC configuration: address invalid
Description The Layer 2 Tunneling Protocol process (l2tpd) maintains a copy of the Junos
configuration database in memory. It could not add information about the indicated
tunnel to the in-memory configuration for the PIC, because the local or remote address
provided for the tunnel was invalid.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_TUNNEL_CFG_DELETE_FAILED
System Log Message Unable to remove L2TP tunnel tunnel-id from PIC configuration
Description The Layer 2 Tunneling Protocol process (l2tpd) maintains a copy of the Junos
configuration database in memory. It could not remove information about the indicated
tunnel from the in-memory configuration for the PIC.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_TUNNEL_DELETE_FAILED
System Log Message Unable to delete L2TP tunnel tunnel-id (errno error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not delete information about the
indicated tunnel.
Type Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.394
Junos 10.3 System Log Messages Reference
To Next Page
Loading...