Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity error
Facility LOG_NEWS
L2TPD_TUNNEL_DEST_IF_LOOKUP_FAIL
System Log Message Unable to find destination interface for L2TP tunnel tunnel-id remote address:
error-message
Description The Layer 2 Tunneling Protocol process (l2tpd) tried to use route lookup to determine
which local logical interface to use to reach the remote end of the indicated tunnel. The
attempt failed.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_TUNNEL_GROUP_ADD_FAILED
System Log Message Unable to create L2TP tunnel group
Description The Layer 2 Tunneling Protocol process (l2tpd) could not create a tunnel group.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_TUNNEL_GROUP_CFG_ADD_FAIL
System Log Message Unable to add tunnel group tunnel-group (service set service-set) to configuration for
PIC pic-slot: error-message
Description The Layer 2 Tunneling Protocol process (l2tpd) maintains a copy of the Junos
configuration database in memory. It could not add information about the indicated
tunnel group and service set to the in-memory configuration for the indicated PIC.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_TUNNEL_GROUP_CFG_DEL_FAIL
System Log Message Unable to delete tunnel group tunnel-group (service set service-set): error-code
Description The Layer 2 Tunneling Protocol process (l2tpd) could not delete information about the
indicated tunnel group and service set.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
395Copyright © 2010, Juniper Networks, Inc.
Chapter 46: L2TPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English