L2TPD_TUNNEL_GROUP_CREATE_FAILED
System Log Message Unable to create L2TP module for tunnel group address
Description The Layer 2 Tunneling Protocol process (l2tpd) could not create the indicated protocol
tunnel group.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_TUNNEL_GROUP_DELETE_FAILED
System Log Message Unable to delete L2TP tunnel group tunnel-group-id (errno error-code)
Description The Layer 2 Tunneling Protocol process (l2tpd) could not delete information about the
indicated tunnel group.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_TUNNEL_GROUP_IDX_MISMATCH
System Log Message Tunnel group index index1 in message does not match index index2 stored for L2TP tunnel
tunnel-id
Description The Layer 2 Tunneling Protocol process (l2tpd) received a message with the indicated
tunnel group index, which did not match the indicated group tunnel index stored for the
indicated tunnel.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_TUNNEL_GROUP_RESTART_FAIL
System Log Message Unable to restart L2TP module for tunnel group
Description The Layer 2 Tunneling Protocol process (l2tpd) could not restart a protocol tunnel group.
Type Error: An error occurred
Severity error
Facility LOG_NEWS
L2TPD_USER_AUTHN_NOT_FOUND
System Log Message Unable to find user profile username during PPP authentication
Copyright © 2010, Juniper Networks, Inc.396
Junos 10.3 System Log Messages Reference
To Next Page
Loading...