LIBJNX_DEFAULT_IP_ADDR_NOT_SET
System Log Message Unable to retrieve system default IP address: not set in kernel (error-message)
Description A JUNOS process could not retrieve the system default IP address from the kernel,
because the address is not defined there.
Type Error: An error occurred
Severity critical
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_EVLIB_FAILURE
System Log Message function-name: error-message
Description A JUNOS process called the indicated function in the event library. The function failed
for the indicated reason.
Type Error: An error occurred
Severity emergency
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_EXEC_EXITED
System Log Message Command stopped: PID pid, signal='return-value'core-dump-status, command 'command'
Description A JUNOS process created a child process to execute the indicated command for it. The
child process stopped unexpectedly.
Type Error: An error occurred
Severity notice
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_EXEC_FAILED
System Log Message Child exec failed for command 'command': error-message
Copyright © 2010, Juniper Networks, Inc.406
Junos 10.3 System Log Messages Reference
To Next Page
Loading...