Description A JUNOS process called the exec() system call while creating a child process to execute
the indicated command for it. The system call failed.
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_EXEC_PIPE
System Log Message Unable to create pipes for command 'command': error-message
Description A JUNOS process created a child process to execute the indicated command for it. Its
attempt to create pipes for communication with the child failed.
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_EXEC_SIGNALED
System Log Message Command received signal: PID pid, signal signal-namecore-dump-status, command
'command'
Description A JUNOS process created a child process to execute the indicated command for it. The
child process received the indicated signal and exited.
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_EXEC_WEXIT
System Log Message Command exited: PID pid, status return-valuecore-dump-status, command 'command'
Description A JUNOS process created a child process to execute the indicated command for it. The
child process exited abnormally with the indicated exit code.
407Copyright © 2010, Juniper Networks, Inc.
Chapter 50: LIBJNX System Log Messages
To Next Page
Loading...