Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Type Error: An error occurred
Severity notice
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_FILE_COPY_FAILED
System Log Message Failed to copy from source-filename to destination-filename
Description A JUNOS process could not copy the indicated source file to the indicated destination
name or location.
Type Error: An error occurred
Severity error
Facility ANY
LIBJNX_FILE_SYSTEM_FAIL
System Log Message pathname: error-message
Description A JUNOS process could not obtain status information for the indicated file system.
Type Event: This message reports an event, not an error
Severity error
Facility ANY
LIBJNX_FILE_SYSTEM_SPACE
System Log Message Not enough space left on device pathname
Description A JUNOS process found that the indicated file system did not have the free space needed
for storing temporary files.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
LIBJNX_INVALID_CHASSIS_ID
System Log Message function-name: invalid chassis ID chassis-id
Description A JUNOS process could not determine the hostname for the master Routing Engine on
a routing node in a routing matrix, because the indicated chassis ID provided for the
routing platform was invalid.
Type Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.408
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English