EasyManua.ls Logo

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_REPLICATE_RCP_ERROR
System Log Message operation: operational-status
Description The rcp command failed during replication.
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_REPLICATE_RCP_EXEC_FAILED
System Log Message rcp failed: error-message
Description A JUNOS process created a child process to copy a file to the other Routing Engine. The
copy operation failed.
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_SNMP_ENGINE_FILE_FAILURE
System Log Message function-name: operation: operation filename: error-message
Description A JUNOS process could not perform the indicated operation on the indicated SNMP
engine data file.
Type Error: An error occurred
Severity critical
Facility ANY
Cause An internal software failure occurred.
Copyright © 2010, Juniper Networks, Inc.410
Junos 10.3 System Log Messages Reference

Table of Contents

Related product manuals