Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Action Contact your technical support representative.
LIBJNX_SNMP_ENGINE_SCAN_FAILURE
System Log Message function-name: fscanf : filename scanning: data Error: error-message
Description A JUNOS process could not perform the scan operation on the indicated SNMP engine
data file.
Type Error: An error occurred
Severity critical
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_SOCKET_FAILURE
System Log Message operation: error-message
Description Various system processes use Transmission Control Protocol (TCP), User Datagram
Protocol (UDP), and Reliable Data Protocol (RDP) sockets. The indicated socket operation
failed for the indicated reason.
Type Error: An error occurred
Severity emergency
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
LIBJNX_XML_DECODE_FAILED
System Log Message Invalid XML encoding 'data', skipping to ';'
Description The XML parser ignored the indicated XML data sent by a client application, because the
XML encoding of the data was invalid. The parser skipped ahead to the likely endpoint
for the invalid data.
Type Error: An error occurred
Severity error
Facility ANY
Cause A possible cause is improper escaping of character constants in the data stream.
Action Contact your technical support representative.
411Copyright © 2010, Juniper Networks, Inc.
Chapter 50: LIBJNX System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English