Type Error: An error occurred
Severity error
Facility ANY
Cause Possible reasons: the given PIC is not responding and/or is offline.
Action Contact your technical support representative.
LIBMSPRPC_CLIENT_WRONG_OUTPUT
System Log Message Error executing "command": output length exceeds correct-length characters
Description Remote execution of the command given from the RE to the PIC failed, PIC returned
unexpected output.
Type Error: An error occurred
Severity notice
Facility ANY
Cause Possible reasons: a)wrong command b)wrong arguments.
Action Contact your technical support representative.
421Copyright © 2010, Juniper Networks, Inc.
Chapter 52: LIBMSPRPC System Log Messages
To Next Page
Loading...