Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 - Page 511

MIB2D_SNMP_INDEX_DUPLICATE
System Log Message function-name: duplicate snmpid(snmp-interface-index) old
ifname(interface-name.interface-unit) new
ifname(new-interface-name.kernel-interface-unit)
Description The SNMP index for first interface name was assigned the same SNMP index as second
interface name.
Type Error: An error occurred
Severity emergency
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
MIB2D_SNMP_INDEX_UPDATE_STAT
System Log Message function-name reason filename
Description MIB2D can not get the status of SNMP index file
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
MIB2D_SNMP_INDEX_WRITE
System Log Message function-name: reason filename
Description MIB2D can not write into a file containing all the indices
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
MIB2D_SYSCTL_FAILURE
System Log Message function-name: sysctl type failed: error-message
447Copyright © 2010, Juniper Networks, Inc.
Chapter 59: MIB2D System Log Messages