Description The MIB II process (mib2d) generated a jnxPMonOverloadSet trap when it detected an
overload condition on the indicated monitoring services interface.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
MIB2D_RTSLIB_READ_FAILURE
System Log Message function-name: failed in operation object-name: index (error-message)
Description A call to the indicated function in the routing socket library failed during the indicated
operation on the indicated object.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
MIB2D_RTSLIB_SEQ_MISMATCH
System Log Message function-name: sequence mismatch (expected-value, received-value), resyncing
Description The indicated function in the routing socket library detected a sequence number mismatch.
The MIB II process (mib2d) will resynchronize its data with the Junos kernel.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
MIB2D_SNMP_INDEX_ASSIGN
System Log Message function-name: reason snmpid(snmp-interface-index)
ifname(interface-name.interface-unit)
Description MIB2D can not assign snmp index for each interface.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Contact your technical support representative.
Copyright © 2010, Juniper Networks, Inc.446
Junos 10.3 System Log Messages Reference
To Next Page
Loading...