Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Facility ANY
PFE_SFLOW_HARDWARE_CFG_FAILED
System Log Message dev = device-id, port = destination-port, hardware error-code = error-code
Description The sflow configuration for the port could not be programmed in the hardware
Type Error: An error occurred
Severity error
Facility ANY
PFE_SIP_ADD_PORT_FAIL
System Log Message Failed to add SIP ALG port to application definition table
Description Failed to add the SIP port to the application definition table.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_SIP_DEL_PORT_FAIL
System Log Message Failed to delete SIP ALG port from application definition table
Description Failed to remove the SIP port from the application definition table.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_SIP_MEM_INIT_FAILED
System Log Message Failed to create memory pool for object-name
Description Failed to create a memory pool for SIP.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_SIP_REG_HDL_FAIL
System Log Message Failed to register object-name handle
Description Failed to register the handler with the external module.
Type Error: An error occurred
Severity error
Copyright © 2010, Juniper Networks, Inc.466
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English