PFE_SCCP_REG_VSIP_FAIL
System Log Message Failed to register SCCP client to VoIP State IP port
Description Failed to register the SCCP client to VoIP State IP port.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_SCCP_RM_CLIENTID_FAIL
System Log Message Failed to get SCCP Resource Manager client identifier
Description Failed to get the SCCP Resource Manager client identifier.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_SCREEN_MT_CFG_ERROR
System Log Message failed to operation the screen config due to error-message
Description failed to change the configuration of screen module
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_SCREEN_MT_CFG_EVENT
System Log Message [operation]: screen name - context-name
Description configuration of screen module is changed
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
PFE_SFLOW_CONFIGURATION_FAILED
System Log Message sflow configuration on hardware failed for ifl index = index
Description The sflow configuration for the ifl index could not be programmed in the hardware
Type Error: An error occurred
Severity error
465Copyright © 2010, Juniper Networks, Inc.
Chapter 64: PFE System Log Messages
To Next Page
Loading...